R-D210
2-DIN DAB+ Infotainer

This device model does not support the installation of Android Apps.

  • 2 DIN DAB+ infotainer
  • Capacitive 6.2“ / 15.7 cm 16:9 TFT touchscreen display with 720 x 480p resolution
  • DAB+ tuner with Comfort Scan, 24 station presets and DL-text
  • FM RDS tuner with 18 preset stations (3 bands)
  • OSD menu in 9 EU languages (EN/FR/ES/DE/IT/SE/PT/CZ/NL)
  • Bluetooth hands-free module and A2DP music streaming
  • Integration and control of a rear view camera
  • Multicolour sensor key illumination in 8 selectable predefined colors
  • Programmable analog interface for SWC integration
  • Integrated 4 x 45 watts amplifier
  • Actice (12V) DAB antenna for windshield included with set
  • R-D210 € 199,00

    per piece (plus shipping costs)

  • Key Features
  • Technical Specifications
  • Accessories
  • Test Report
  • Manuals
  • Images
  • FAQs

KEY FEATURES

  • 2DIN DAB+ Infotainer
  • Capacitive 6.2in / 15,7cm 16:9 TFT touchscreen display with 720 x 480p resolution
  • DAB+ tuner with Comfort Scan, 24 station presets and DL-text
  • FM RDS tuner with 18 pre-set stations (3 bands)
  • OSD menu in 9 EU languages (EN/FR/ES/DE/IT/SE/PT/CZ/NL)
  • Bluetooth hands-free module and A2DP music streaming
  • Integration and control of a rear view camera
  • Multicolour sensor key illumination in 8 selectable predefined colors
  • Programmable analog interface for SWC integration
  • Integrated 4 x 45 watts amplifier
  • Actice (12V) DAB antenna for windshield included with set

BLUETOOTH

  • Bluetooth hands-free module
  • Synchronization of 1000 phone book contacts and 3 numbers each
  • Display of iD3-tag in A2DP mode

MULTIMEDIA + AUDIO

  • 1x USB 2.0 port for A/V media playback
  • 1x microSDHC port on device front side for A/V media playback
  • A2DP BT-music streaming with AVRCP 1.0
  • 7-band graphical Equalizer with 6 sound-pre-sets "Normal", "Jazz", "Pop", Classical", "Rock", "Electric"
  • Balance / Fader, Treble / Bass and Loudness controls

CONNECTIONS

  • 4.2 RCA pre-outs (2 V)
  • 1x RCA A/V input for stereo audio and video signal (CVBS)
  • 2x RCA video-output (CVBS)
  • 1x RCA input for auto switching rear view camera signal (CVBS)
  • 1x USB 2.0 port
  • 1x IR-in for connection with CAN / SWC interfaces
Main Device Type
Device type2DIN
Mainboard IC
CPU ProcessorSunplus 8268H
Display Screen + TFT LCD Panel
TFT Type6.2" / 15.7 cm cm LCD, 720*480p resolution and LED illumination
Capacitive Touch ScreenYes
Display Brightness AdjustmentYes
Bluetooth
Bluetooth ModuleSunplus 8268 internal BT module
Built-in Microphone in device front panelYes
Hands Free Function SupportBluetooth 2.1 EDR profile
A2DP BT Audio StreamingYes, with AVRCP1.0
Built-in MicrophoneYes
Phonebook Import FunctionYes
Connect Code0000 - Name: RADICAL
FM Tuner
HardwareST Microelectronics 7786
FM Frequency Range87.5 MHz > 108.0 MHz
Radio Stations18 FM station presets (3 Bands)
Built-In RDS Radio Receiver FunctionYes
Radio Frequency RegionEurope
Antenna Phantom Power SupplyN.A.
DAB+ Tuner
HardwareEkong
Tuner Memory24 DAB+ station presets
Comfort FunctionsComfort Scan, DLS-text
Antenna Phantom Power Supply300 mA
Audio + Multimedia
Internal 4CH amplifier ICSt Microelectronics TDA7388
Max. power OutputInternal 4CH amp with 4x45W
Audio ControlsBalance / Fader, Bass / Treble
Graphic Equalizer7-Band EQ and 6 selectable presets > "Normal", "Jazz", "Pop", Classical", "Rock", Electric"
Supported Digital Audio FormatsMP3, WMA, AAC, WAVE, FLAC, APE, OGG, M4A (QT), DTS, RA
Supported Digital Video Formats (USB/SD)AVI, MKV, QT, MPG, ASF (WMV), FLV, RMVB, TS
Supported Digital Picture FormatsJPEG, BMP, GIF, PNG, TIFF
USB/SD Memory AddressingUSB port/microSD card reader up to 32GB of memory.
Input & Output
4.2CH Line outYes, via RCA > 2 V signal level
USB 2.0 PortOne USB port with 400mA charging current and 1m cable extension
micrSDHC PortAt device front, supporting up to 32GB memory size
AUX Audio/Video inputYes, stereo audio via RCA, video CVBS signal (NTSC) 1V p-p, 75 Ohm via RCA
Input for Rear View CameraYes, PAL / NTSC auto-switching
FM Antenna InputYes, ISO connector, 50 Ohm
SWC signal inputAnalog signal for SWC remote control function
Miscellaneous
Firmware- / Software UpdateYes, via microSD port at device front
Boot ScreenStatic, Radical
Sensor-field illuminationBi-color, 8 selectable predefined colors
Menu LanguageOSD Menu in 9 EU languages, EN/FR/ES/DE/IT/SE/PT/CZ/NL
Auto Memory FunctionYes
Power SupplyDC12V, negative Ground
Max Working Current≤15A
  • Rear View Camera (Coming soon)

AW: Yes, an active film type DAB antenna for front window mounting is included.

AW: In order to protect RADICAL devices against under voltage conditions and resulting malfunctions such as software crashes or even damage to the electronics, the R-D210 features an automatic under voltage test during the boot process: If the voltage falls below approx. 10.5 volts, the device is automatically restarted to initialize the device software correctly.
The cause of device reboots is therefore to be found in the on-board voltage system, which drops to a value of less than 10.5 volts during the start of the engine. Please contact your garage and have the battery and cable connections checked.

AW: Yes, the device has a RGB multicolor button illumination. The color of the soft key illumination can be adjusted in the Radical Device setup to suit the target vehicle. Or you can set an individual color accent in the cockpit.

AW: The target vehicle must offer a 2-DIN slot in the dashboard, for the R-D210 to be installed. Depending on your car brand and model you may also need a CAN/Stalk adapter or a vehicle specific mounting/installation kit. Your RADICAL dealer can assist you with further details.

AW: It should be an analog/resistance based steering wheel remote control system. An authorized RADICAL dealer can offer such installation service. Alternatively, the device can also be connected to vehicle steering wheel remote controls via IR-In input with a separately available vehicle-specific stalk interface (see next FAQ entry).

The steering wheel control buttons of your car can be connected to the RADICAL device using an optional CAN/Stalk adapter. The functionality related to the multifunction steering wheel depends on the chosen CAN/Stalk adapter itself. Please also make sure that the CAN/Stalk adaptor you want to deploy is compatible with the RADICAL IR/IN interface protocol.

AW: No, this is not possible. Aside of this, the RADICAL device include a hands free system. If there is a OE hands-free stem, it is strongly recommended to deactivate the system by removal of the related fuse in the fuse box of your car.

AW: No, the device does not generate any lines for the camera view. The device does not feature read-out of steering rack angle and can therefore not show dynamic grid lines. In you want to use grid lines you should purchase a camera model which offers/contains this specific function.

AW: You need to start a search for the RADICAL via your smartphone. Confirm the Bluetooth pairing request by entering the Bluetooth password of the Radical device (Standard: 0000).

of your Your RADICAL device is only visible to other Bluetooth devices if you enter the BT-source of your RADICAL with active page BT-Settings & More, respectively press the Smartphone Icon on R-D210 (see manual).

AW: To import the phonebook to the device, the respective import option needs to be enabled in the Bluetooth settings of your smartphone.

AW: Make sure the disk you want to use is formatted with the FAT32 file system on a Windows PC or notebook. RADICAL always recommends using high-quality USB sticks with a data volume of up to 32 GB. Larger data volumes are possible, but the detection is depending on the memory controller IC and should be empirically tested for proper function. Also note that the USB port is designed for a maximum current draw of 500 mA. This means that normal hard disk based hard drives are usually not compatible, as the startup current of the hard drive is much higher. The external hard disk will not be indexed in such cases.

 devices if you enter the BT-source of your RADICAL with active page BT-Settings & More, respectively press the Smartphone Icon on R-D210 (see manual).

AW: Make sure the disk you want to use is formatted with the FAT32 file system on a Windows PC or notebook. SD and SDHC cards are both supported. RADICAL always recommends using high-quality SD / SDHC cards with a data volume of up to 32 GB.

AW: It is possible that the file system of the memory is damaged, or that the formatting of a memory device is lost due to write cycles. The causes for this can be of different nature, e.g. use or storage of the data carrier as well as problems during the initial formatting of the medium. In these cases, you will need to reformat the disk. Please note the following: Under a Windows operating systems, you have the option of a quick format or full format. If you have problems with the disk, we do recommend a full format of the memory. To perform a full format, make sure that the check mark in the formatting Options -> Quick Format is not set. Make sure the FAT32 file system is selected. If your memory media is still not detected by the device after it has been formatted, it may be due to an incompatibility of the media itself or the controller chip. In such cases, simply try another type or make.

AW: Software updates can be found in the support section under device software update:

http://my-radical.com/radical-support/device-software-update/

Function Highlights:

Copyright © 2019 RADICAL All rights reserved.